Customer #:
top of page

GM-CTR-SM6120-CAN (HGM6120CAN SMARTGEN • Generator controller, AMF + one mains one gen system + CANBUS interface)

 

DESCRIPTION:

HGM6100N series automatic controller, integrating digital, intelligent and network techniques, is used for automatic control and monitoring system of single genset. It can carry out functions of automatic start/stop, data measurement, alarm protection and “three remote” (remote control, remote measurement and remote communication). The controller uses LCD display, optional language interface including Chinese, English, Spanish, Russian, Portuguese, Turkish, Polish and French with easy and reliable operation.

HGM6100N series automatic controller uses micro-processing technique which can achieve precision measurement, value adjustment, timing and threshold setting etc. All the parameters can be configured from front panel or use USB interface (or RS485 interface) to adjust via PC. It can be widely used in all types of automatic control system for its compact structure, simple connections and high reliability.

 

PERFORMANCE AND CHARACTERISTICS

HGM6100N controller has six variants:

HGM6110N/6110NC/6110CAN: Automatic Start Module, it controls generator to start/stop by remote start signal;

HGM6120N/6120NC/6120CAN: Based on HGM6110N/6110NC/6110CAN, it adds mains AC monitoring and mains/generator automatic switching control (AMF), especially suitable for the automation system composed by mains and genset.

NOTE1: HGM6110NC/6120NC has RS485 port, HGM6110N/6120N without.

HGM6110CAN/6120CAN has CAN port, HGM6110N/6120N and HGM6110NC/6120NC without.

NOTE2: HGM6110/6120 is taken as an example to describe in this manual.

Main characteristics are as following:

  • 132x64 LCD display with backlight, optional language interface (Chinese, English, Spanish, Russian, Portuguese, Turkey, Polish and French), push-button operation;The Ukrainian language will be supported by customization;
  • Acrylic screen, improved wearable and scratch resistance property;
  • Silica-gel panel and keys can well adapt to higher and lower temperature;
  • RS485 communication port enables “three remote” functions via MODBUS protocol;
  • CANBUS port which can be connected to ECU with J1939, it not only can monitor frequently-used data (such as water temperature, oil pressure, speed and fuel consumption, etc.) but also can control start, stop, high speed and low speed (controller with CANBUS port is needed) via CANBUS port;
  • Adapt to 3P4W, 3P3W, 1P2W and 2P3W (120V/240V), 50Hz/60Hz system;
  • Can measure and display 3 phase voltage, 3 phase current, frequency, power parameter of mains/gens;

Mains Generator

  • voltage (Uab, Ubc, and Uca) Line voltage (Uab, Ubc, and Uca)
  • voltage (Ua, Ub, and Uc) Phase voltage (Ua, Ub, and Uc)

Frequency Hz Frequency Hz

Phase sequence Phase sequence

 

Load

Current IA, IB, IC

Each and total active power kW

Reactive power kvar

Apparent power kVA

Power factor PF

Generator accumulated energy kWh

Output percentage with load %

  • For mains, genset has functions of over/under voltage and loss of phase; For gens, genset has functions of over/under voltage, over/under frequency, over current and over power;
  • Precision measure and display of parameters about engine;

Temp. (WT) °C/°F

  • pressure (OP) kPa/psi/bar
  • level (FL) % Fuel remains L
  • (SPD) r/min
  • Voltage (VB) V
  • Voltage (VD) V

Accumulated running hours

Accumulated start times

GM-CTR-SM6120-CAN (HGM6120CAN SMARTGEN)

SKU: GM-CTR-SM6120-CAN
$289.00Precio
Impuesto excluido
  • Customer satisfaction is our main goal. We believe that our items are of high quality. All products have quality control. They are new and in good condition when shipped to our customers. We are convinced that you will be satisfied with your purchase.

bottom of page