HAT72 SMARTGEN- CONTROLLER DUAL-SUPPLY MODULE WITH RS485 GENSET CONTROLLER
 
DESCRIPTION:
HAT72 is an Automatic Transfer Switch Control Module for 1 way mains/generator, which features 8-Bit microprocessor control. The module is used to monitor two ways of single-phase supply. Once mains supply failure (under voltage, over voltage, under frequency, over frequency) is detected, the module will control ATS to switch after delay. The controller can send out signal of starting the generator after mains failure delay.
 
PERFORMANCE AND CHARACTERISTICS:
Suitable for 1 way mains and 1 way generator ATS control;
Widely power supply range: DC (8-35)V; fit with different voltage environments of start battery;
Mains or generate normal delay can be set; genset start delay can be set;
Mains abnormal delay can be set; genset stop delay can be set;
7 LEDs display the status of operation and alarm;
Transfer relay (CLOSE MAINS, CLOSE GENS) output contact rating: 16A AC250V, passive contact, directly drive the switch to transfer;
Start relay (GENS START) output contact rating: 5A AC250V, passive contact;
Close output can be set to continuous close or pulse close; when pulse close is initiated, close delay can be set.
Providing PC programming port which all delays, power thresholds needed by ATS can be set via PC;
Built-in never halted watch dog to ensure smooth program execution;
Modular design, self-extinguishing ABS plastic shell, pluggable terminal, built-in mounting compact structure with easy installation.
 
TECHNICAL PARAMETERS:
DC power: (8-35)V
AC sampling input: single-phase AC(30-277)V (+20%) 50/60Hz
ATS switch output: 16A AC250V, relay passive contact;
Genset start output: 5A AC250V, relay passive contact;
2 close input ports: active when connected to B-;
Consumption: standby(12V:0.12W, 24V:0.24W), working(12V:1.5W, 24V:1.6W)
Working conditions: Temperature: -30~+70℃ Humidity: 20~95%
Case dimensions: 72*72*52mm Cut out: 67*67mm
Weight: 0.2kg