HGM6110UC SMARTGEN
DESCRIPTION:
HGM6100U series power plant automation controller integrates digital, intelligent, network-based technology for the single turbine automation and monitoring system, automatic start / stop, data measurement, police protection and "three remote" feature. Large-screen LCD controller (LCD) display, Chinese, English, Spanish and Russian optional interface operation, simple and reliable operation.
HGM6100U series power plant automation controller uses microprocessor technology to achieve a precise measurement of various parameters, set point adjustment and timing, threshold setting and other functions, the controller of all parameters can be adjusted from the front control panel or by using a PC program interface adjustments can also be used to adjust the PC via the RS485 interface and monitoring. Its compact structure, simple wiring, high reliability, and can be widely used in various types of generating units automation system.
HGM6100U series has four models:
HGM6110U / 6110UC: for stand-alone automated control signal generator with automatic power shutdown by remote start;
HGM6120U / 6120UC: In HGM6110U / 6110UC based on the increase of the mains power monitoring and mains / generator automatic switching control function (AMF), especially for a city agency into a single automated system.
Note 1: HGM6110UC / 6120UC with RS485 interface, HGM6110U / 6120U no RS485 interface.
Note 2: The later are HGM6110UC / 6120UC example description.
The main features are as follows:
LCD is 132x64, with backlight, four languages (Chinese, English, Spanish and Russian) display, and touch button operation; Screen saver screen with hard acrylic material, good wear resistance and scratch resistance; Silica gel panel and buttons, the ability to adapt to the environment, high temperature; With RS485 communication interface, the use of MODBUS protocol can achieve "three remote" function; Suitable for three-phase four-wire, three-phase three-wire, single-phase two-wire, two-phase three-wire (120V / 240V) power 50Hz / 60Hz system; Acquisition and display mains / generator phase voltage, phase current, frequency, power parameters; Mains with overvoltage, under voltage, phase function, power has overvoltage, under voltage, over frequency, under frequency, overcurrent function;
Sophisticated collection of various engine parameters:
Control and protection functions: automatic diesel generator set start / stop, sub-gate (ATS switching) display and complete fault protection and other functions; ETS has, idle speed control, preheat control, lifting speed control function, and are relay outputs; Parameter settings: allows users to change the setting of its parameters, and memory in the internal FLASH memory is not lost when the system is powered down, the controller of all parameters can be adjusted from the controller front panel, or by using a PC via the programming interface adjustment (using the SG72 adapter) can also be used to adjust the PC via the RS485 interface; A variety of temperature, pressure, oil level sensor can be used directly, and custom parameters; A variety of starting conditions (speed sensor, hydraulic, power generation) option; Wide power supply range (8 ~ 35) VDC, can adapt to different starting battery voltage environments; All parameters are used in digital adjustment, eliminating the conventional analog potentiometer adjustment method to improve the reliability and stability of the machine; There are design between the shell and rubber sealing rings of the control panel, waterproof up to IP55; Controller with metal clamps fixed; Modular design, fire-retardant ABS shell, removable terminal blocks, embedded installation, compact, easy to install.